.15 x .68 x 4 in. Parallel_L2 Copper Superconductor

.15 x .68 x 4 in. Parallel_L2 Copper Superconductor

89.00 120.00
Add To Cart

.15 x .68 x 4 in. Parallel_L2 Copper Superconductor

  • These pieces are cut from a cylinder. The sides and faces are parallel. The wider dimension is used. 
  • Please contact if any questions.  

Product Details

The first picture in the gallery is the piece being offered for sale. The next pictures usually are of the same piece or very similar pieces at other angles. If you would like additional images, please contact us and we will send.

  • Copper Superconductor

  • EDM Cut with EDM Finish (EDM Finish is flat as glass and smooth. No big gashes, easy to sand out.)

  • Faces are flat and parallel, unless otherwise indicated.

Note: We do not offer returns on superconductor after it has been altered. The seams between the Niobium and Copper/Cupronickel are not welded and special considerations need to be taken into account when working with this material and minimum force should be applied as excess force can break the seam between the copper/cupronickel and niobium resulting in structural failure (Do not treat superconductor as a solid metal billet. Work Slowly). Do not let the superconductor become hot while working, heat caused by friction when working on the metal will expand the different metals at different rates, causing the seams between them to split and fracture. Using tools not designed for metal will especially cause more than usual stress and heat buildup (i.e. using drill bits and hole-saws designed for wood). All superconductor should be treated with care.